Tile Roofing · Scottsdale, AZ

Foam Roof Repair & Recoating in Scottsdale

An old foam roof does not automatically need replacement

Many existing foam roofs need maintenance before they need a full replacement. The question is whether the foam and substrate are still sound enough to repair and recoat.

Request a Roofing Estimate Call [PHONE]

SCOTTSDALE, AZ

Tile Roof Underlayment Replacement in Scottsdale

When the tiles still look good but the roof does not

One of the most confusing Arizona roofing situations is a tile roof that looks fine from the street but leaks during rain.

The issue may be the waterproofing below the tile rather than the tile itself.

Request a Roofing Estimate Call [PHONE]

DON’T COAT OVER A PROBLEM

What a Recoat Should Not Hide

A new coating should not be used to cover wet, loose or deteriorated roofing without addressing the underlying problem.

Soft areas, trapped moisture, failed foam and drainage defects need to be identified first.

Request a Roofing Estimate Call [PHONE]

Common Foam-Roof Problems

Poor drainage

Exposed foam

Soft spots

Cracks

Blisters

Failed details around penetrations

Punctures from foot traffic or service work

Worn or chalking topcoat

Storm/hail damage

Old patchwork

THE PROCESS

Typical Repair/Recoat Process

Request a Roofing Estimate Call [PHONE]
01

Inspect

Inspect and identify damaged areas.

02

Prepare

Clean and prepare the surface.

03

Remove / Repair

Remove or repair unsuitable material.

04

Correct Details

Correct details that can be corrected. Repair foam/flashings as required.

05

Apply Coating

Apply the compatible coating system to the proper preparation and specification.

The actual products and application rates should come from the contractor/manufacturer — not generic website promises.

FAQs

Look at the protective coating condition rather than relying on a calendar alone. Chalking, worn areas, exposed foam, cracking or loss of protective thickness are reasons to have it evaluated.

Often, yes. The damaged area should be opened or prepared correctly, repaired with compatible materials and recoated so the foam is protected again.

Possible causes include trapped moisture, adhesion problems, damaged substrate or prior repair issues. A soft spot should be diagnosed before coating over it.

Not responsibly without inspection and preparation. Failed foam, wet areas, loose material, cracks, penetrations and drainage problems should be addressed first.

No. A recoat renews the protective surface on an existing suitable foam roof. A new foam installation creates or substantially rebuilds the SPF roofing system.

Photos and notes on coating condition, soft areas, penetrations, cracks, drainage, previous repairs and any moisture concerns help define the work that needs to happen before coating.

Tile Roof Looks Good But Still Leaking?

Call [PHONE] and ask for a tile-underlayment evaluation.

Request a Roofing Estimate Call [PHONE]

Have an older foam roof that is cracking, leaking or losing coating?

Call [PHONE] for a repair/recoat evaluation.

Request a Roofing Estimate Call [PHONE]